All Ford transmissions built prior to 1977, and certain models that continued in use during 1977-1980, were designed for a high-friction fluid that allowed the shifting clutches to lock up or engage quickly. Ford specification ESW-M2C33-F covers this type of product, which is commonly referred to as “Type F” fluid.
What vehicles use Type F transmission fluid?
Havoline Automatic Transmission Fluid Type F is recommended for automatic transmissions in Ford, Mercury, and Lincoln passenger cars and light trucks manufactured by Ford Motor Company and certain other makes prior to 1977, and some makes from 1977 to 1981 (consult the vehicle owners manual).
Can I use Type F instead of dexron?
As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.
What is Type F transmission fluid equivalent?
This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.
What is the difference between Type F and dexron transmission fluid?
What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.
Is Type F fluid synthetic?
Lucas Semi-Synthetic Type F Automatic Transmission Fluid is blended from premium paraffinic and synthetic base oils (Groups II+ and Ill), with shear stable synthetic polymers and viscosity modifiers, combined with a high-quality additive package that includes anti-wear, anti-oxidants and corrosion inhibitors.
Can you put Type F transmission fluid?
RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.
Can you mix Mercon with Type F transmission fluid?
It’s generally held that a quart or two of F and the rest of a C4 filled with Mercon works fine.
Can you use Type F transmission fluid in a Chevy?
Type “F” fluid is a heaver viscosity. Stands more heat also. Just the installation of type “F” fluid will have a firmer shift. You can not use it in a any of the GM overdrive transmissions.
Is dexron 3 compatible with Type F?
Yes. A newer (in the last 40 years) rebuild of a C4 means it can use Dexron and work just fine. Some people like to use Type just because the antique service manuals say to. Some folks use Dexron and then a single quart of Type F for the additives.
Is Type F transmission fluid the same as ATF?
General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. … This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.
What happens if you put the wrong type of transmission fluid in your car?
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
Does it matter what transmission fluid I use?
It is also important to use the correct type of automatic transmission fluid because different fluids have very different properties. The wrong fluid can cause irregular pressures, clogs, precipitation or corrosion which can all drastically shorten the life of your transmission.
What replaces ATF Type A?
The “Type A, Suffix A” specification replaced Type “A” in the late 1950’s. Dexron “B” fluid later replaced Type A, Suffix A. All iterations of Dexron B, Dexron II and Dexron III ATF products are backward compatible with Type A and Type A , Suffix A fluids.